Brewtools EVA-python Single 8.5x14mm - Insulated Glycol Tube (per meter)
Brewtools EVA-python is the purpose-built line for moving chilled glycol between your chiller and your fermenter without sweating all over the floor. The inner tube is 8.5 mm reinforced EVA — stiff enough that it cannot kink shut and choke the flow, which matters on a glycol loop where a pinched line means a warm fermenter — wrapped in closed-cell insulation to 14 mm outside. The insulation does two jobs: it stops condensation forming on the cold line, and it keeps the cooling power in the glycol instead of losing it to the room.
Sold per meter as one continuous length: order 3, get one uncut 3-meter piece. Measure your run from chiller to fermenter and back, add a little slack, and order that many meters. The reinforced inner fits standard 8–10 mm (3/8") hose barbs, secured with a hose clamp.
Key features
- Insulated glycol line — no condensation, no lost cooling power
- Reinforced 8.5 mm EVA inner tube — holds its bore, will not kink shut
- 14 mm outer diameter including closed-cell insulation
- Fits 8–10 mm (3/8") hose barb fittings
- Single line — run two lengths for flow and return
- Sold per meter, cut as one continuous length
Usage
- Run one line from chiller outlet to the fermenter cooling coil or jacket, a second line back
- Push over an 8–10 mm barb and secure with a 10–16 mm hose clamp
- Works with any glycol chiller and pre-mixed propylene glycol solution
Quick facts
- Brand: Brewtools (art. 7712738)
- Type: insulated, reinforced glycol tube — single line
- Size: 8.5 mm inner / 14 mm outer (insulated)
- Fits: 8–10 mm (3/8") hose barbs
- Sold: per meter, one continuous length per order
Related products
- Propylene Glycol E1520 5kg — the coolant that runs through it
- RAPT Fermentation Chamber — the other route to fermentation temperature control
- Silicone Hose 8mm ID — the uninsulated option for short, warm-side runs
- Butterfly Hose Clamp 10-16mm — clamps the line onto its barbs, by hand